高性能碳基储能材料的设计、合成与应用

电化学储能器件的性能很大程度上决定于其电极材料。碳材料具有来源广泛、化学稳定性好、易于调控、环境友好等优点，被广泛应用于各类能量存储系统，但仍存在能量密度低、倍率性能差等问题。本文从碳材料孔结构调控、杂原子掺杂、与金属氧化物复合三个角度，综述了构建高性能碳基储能材料的设计合成策略，介绍了其在锂/钠离子二次电池、超级电容器等领域的研究进展，对几种方法策略的优缺点进行了总结，并对未来的研究方向进行了展望。本文对高性能碳基储能电极材料的设计开发具有积极意义。     

铸造式和焊接式主轴箱体的动态特性对比分析

利用有限元法和试验模态法对立式加工中心的铸造式和焊接式两种结构的主轴箱体进行了模态分析,分别获得了其前六阶固有频率和振型。通过对比两种方法获得的结果,验证了有限元分析模型的有效性。研究表明,两种主轴箱体的阻尼比接近,但焊接式主轴箱体的各阶固有频率均要高于铸造式主轴箱体的各阶固有频率。并且铸造式主轴箱体的固有频率更接近于机床主轴的常用工作频率,焊接式主轴箱体的则远离此频率。因此对于常用主轴转速而言,焊接式主轴箱体的动态性能要优于铸造式主轴箱体的动态性能。     

Chromatic processing for feature extraction of PD-induced UHF signals in GIS

Partial discharge (PD) detection is an effective means of discovering insulation faults in gas-insulated switchgear (GIS). One of the most extensively used methods in PD detection has historically been the ultrahigh frequency (UHF) method. This study evaluates the chromatic processing methodology and its key factors for feature extraction of UHF signals in GIS. Three types of artificial defects are installed in the GIS tank at 0°, 90°, and 180°, respectively. The features of the UHF signals are extracted in the chromatic space, and PD discrimination of the defects is achieved. The influences of processors are studied before the feature selections are suggested. The time-stepping method is proposed to determine the rules of UHF signal frequency characteristics that vary with time. Finally, the process and options of the chromatics-inspired methodology are summarized.     

Gait event detection algorithm based on smart insoles

Gait analysis is an effective clinical tool across a wide range of applications. Recently, inertial measurement units have been extensively utilized for gait analysis. Effective gait analyses require good estimates of heel‐strike and toe‐off events. Previous studies have focused on the effective device position and type of triaxis direction to detect gait events. This study proposes an effective heel‐strike and toe‐off detection algorithm using a smart insole with inertial measurement units. This method detects heel‐strike and toe‐off events through a time‐frequency analysis by limiting the range. To assess its performance, gait data for seven healthy male subjects during walking and running were acquired. The proposed heel‐strike and toe‐off detection algorithm yielded the largest error of 0.03 seconds for running toe‐off events, and an average of 0–0.01 seconds for other gait tests. Novel gait analyses could be conducted without suffering from space limitations because gait parameters such as the cadence, stance phase time, swing phase time, single‐support time, and double‐support time can all be estimated using the proposed heel‐strike and toe‐off detection algorithm.     

Ex post demand information sharing between differentiated suppliers and a common retailer

We consider ex post demand information sharing in a two-echelon supply chain in which two suppliers sell differentiated products through a common retailer. We model three scenarios of information sharing to characterise the conditions under which information sharing may benefit or hurt different players: (1) no supplier is informed; (2) only one supplier is informed; and (3) both suppliers are informed. We find that the retailer may voluntarily share the low demand information when the product differentiation and demand magnitude satisfy certain conditions. In contrast, the retailer has no incentive to share the high demand information, even though this information benefits the suppliers. To achieve information sharing, we propose a side payment mechanism, which allows benefitted players to subsidise hurtful players. Finally, we extend our model by considering a situation where the suppliers have limited capacity and may invest to ramp up production capacity to satisfy a high demand.     

基于差频检测技术的高速AD单粒子翻转评估方法研究

本文基于差频检测的原理，提出一种在高频动态输入模式下，对高速高精度模数转换器（AD）的抗单粒子翻转效应进行评估的测试方法，并以一款8位3 GSPS高速AD为测试对象，设计开发了一套高速AD单粒子翻转效应测试系统，对目标器件进行了重离子试验。通过对试验结果的图像和错误数据进行分析，评估参试器件的抗辐照性能参数，为抗辐照高速高精度AD的加固设计提供数据支撑。     

F-OFDM仿真系统设计与时频同步算法

针对新一代5G波形的F-OFDM技术开展了研究,通过把一个宽带分为若干个子带,对每个子带进行滤波处理以实现更好的通信效能。基于Simulink平台进行了F-OFDM仿真系统的搭建,重点对F-OFDM符号同步方法和频偏估计方法进行了研究与仿真分析。实验结果表明,基于Chu序列相比采用PN序列可以获得更好的同步效果,基于导频的Classen频偏估计算法相比基于CP的CFO估计算法和基于训练序列的Moose估计方法可以获得更好的频偏估计效果。     

基于星座图对射频指纹识别方法的研究

针对星座图的射频(RF)指纹识别方案中,低信噪比环境下识别准确率低的问题,提出一种基于欧式距离与幅度距离的二维识别算法来进行RF指纹识别。该方案通过对星座图进行优化处理,可从优化后的星座图中提取识别性能更好的RF指纹,再通过二维识别算法来提高识别准确率。仿真结果表明:与仅用欧式距离作为判断依据的方法相比,所提出的二维识别算法的识别准确率最高可提升8%,在设备容量为50组的情况下识别准确率为77.8%,并且从优化后的星座图中所提取的RF指纹具有更好的唯一性和稳定性。     

管道清管器运行速度控制技术研究进展

随着对管道安全问题和降本增效理念的逐步重视，管道清管操作已成为全世界油气管道运行中必不可少的作业规程，清管器的运行速度是需要重点控制的参数之一，当其处于合理区间内时（原油管道1~5m/s，天然气管道2~7m/s），清管效果最佳。本文基于对管道清管数学模型的研究，首先论述了不同的被动控制方法，认为该方法较为灵活，应用广泛，对不同入口条件下清管器速度的准确计算是能否控制清管器速度处于合理区间的关键；然后对不同的主动控制方法进行了研究，研究表明：射流清管器速度控制的核心是旁通率的优选，其依赖于压降系数、皮碗与管壁间摩擦力的准确计算，建立简便可靠的摩擦力工程计算模型将有助于射流清管技术应用的进一步推广；最终本文对清管器智能调速技术进行综述和展望，指出发展稳定可靠的国产智能调速技术是未来重点研究方向。     

一种射频抗电磁干扰的矿用红外温度传感器

设计了一种适用于复杂条件下实施井下温度探测的射频式红外温度传感器。借助于光学系统、光电探测器实时感应井下温度并提取温度信号,同时在DC-DC电源隔离模块中实施EMI滤波以抗电磁干扰,处理后的信号经过A/D转换、运算器放大后显示在LCD上,实施读取数据并记录在传感器的存储片上,实现了矿井复合灾害条件下的温度测试,测试精度控制在±2%。